Look you step location is muddy and slippery from yesterday rain by safe

Doing the operation and we were primed the lines I saw a little leak I got with the crew and we fix the leak and we continue in a job. Got done safe.

Working in cellar with hoses and piping oil what’s 33 point contact on stairs was just cash is a tripping hazard. Good job.

Went job is done always keep location clean be safe

On safety meeting PIC talked about walking forward’ never walk backwards, and watch your step because obstacles on the ground may make you tripping and fall and possibly injured

The sellers had oil was slippery. Had to watch foot placement Tylenol. Good job.

Meet and greet was properly conducted and JSA was elaborate and exceptional with detail of present hazards

Be careful this weather please keep safe drinking plenty of water

Noticed thick weeds around valves and wellhead took the initiative to remove them before we started work

As I start pumping down hole I noticed dripping from tubing pin hammer Union I noticed my PIC went to water pump 2 bbl. Stop release pressure fix the problem and continue the job

Watch you steps because the ground is not level make small steps be safe

Getting to location we where testing the shower and it has a leak so we got a new shower from the yard

Coming In to location gps crew let’s us know that there was a lot of hoses on the ground and to watch where we step

Do you want the operation we’re getting ready to start pumping and I see a guy close to the red tape zone right away I want to talk to him and ask him and I’ll be around this area because we’re
gonna pump acid if it’s gonna be around you have to have a gear on it didn’t know but he was OK and we continue pumping in the job got down safe

Do you want the operation we’re getting ready to start pumping and I see a guy close to the red tape zone right away I want to talk to him and ask him and I’ll be around this area because we’re
gonna pump acid if it’s gonna be around you have to have a gear on it didn’t know but he was OK and we continue pumping in the job got down safe

Used the right gloves for the job task good observation MTS operators good job

As we rig up we make sure that we have the right tools for the job, we rig down as well always wearing impact gloves

Before start rigging up on the well, there was a lot of weeds, so have to use a shovel to clean it out . But there was no snakes ????

As we start pumping water I noticed water leak on the high pressure line I notified The P I C stop release pressure fixed the problem and continue pumping

As we rigging up I observed my coworkers used the face shield as we supposed bring it down went we hammering unions or connecting or opening valve

Doing the operation, MTS employer was hammering we are the face shield down. I’ll pull it to the side. Let her know that every time we be hammering, he hast to have the face shield down. He
understood and he apologize and we continue our task. The job got done safe.

Doing the operation before we were getting ready to start the Acid I see a guy approach where the red tape Was I came out of my truck and talk to the guy. Let him know he can be around this area and
explain the stuff we were doing and the procedures the only way he can come in to sign the jSA and have a PPE he understood can be around this area. Everything went well. The job got done safe.

Pumper forgot to put his 5 gallon bucket

Our procedures was done correctly, neatly and officially great job

It was going to be 85 and we told transport to drink in the water and to get inside his truck

There’s a lot of hoses on the ground with everybody now on the safety mini to watch out and watch out for snakes

Please drink plenty of water avoid to get heat stress be safe

Watch you steps when walking ground is not level avoid to get hurt be safe

We did three wells today and on my observation, I seen everybody using on the ringing up and ringing down good technique when we lifting they’re been using their legs dragging hoses, not backwards,
hammering, wearing face shields and the man with the chemical suit wearing everything.

As we start pumping I noticed that one of the hammer unions start leaking I stopped fixed the problem and continue we the job

Near Miss while pumping customer flow line started leaking about 5 gallons of HCl flush line treated HCl with soda ash

Doing the operation when we having our safety meetings I’ll let my PIC know that this location was a lot of pipes around the well so so we discuss and create a plan how to work around pipes that the
job got done safe

As we got on location PIC spot us secure trucks always with positive attitude and with eyes on path signed safety meeting sheet and attend safety meeting

All standard procedures was done correctly. Everybody did a great job and your crew.

Doing the operation a MTS, employee was using the right tools to get the job done job got done safe

Be safe look for snakes look around you all the time

As we were ready to hammering the unions my coworker noticed that he wasn't wearing face shield stop and adjust it

As we were ready to hammering the unions my coworker noticed that he wasn't wearing face shield stop and adjust it

A lot of even ground

This is a Friday and we’re going into our long weekend for the holiday on Monday and after the job we talk about be safe on what we do on the weekend and do it safely to be able to come back after
the holiday be safe..

As we get on location, I scan it to make sure that went we leave location we leave it the same way or Vetter

Aspiring shower ,, I was park my shower, about 5 feet close to a well and my supervisor came over to signed me in, and he made me move my pick up 5 feet away from that well.

We need to keep location clean good housekeeping all crew be safe

Good job keep safe MTS crew went used the hammer stay away and face shield down

A lot of hoses on the ground talked about it in the safety meeting

Face shield was not fully all the way down when hammering.

Employee walked around flow line instead of walking over it.

Employee Made sure hands where clear before hammering on wing

During their operation, Mts employee every time he was hammering, was putting hes face shield down Great job, job. Got done safe.

Doing the operation we’re getting ready to prime the lines and pressure test. I noticed there was a little leak in the wellhead so I got with my PIC we talk about it and will fix the problem and we
continue where our task and the job got them safe

Doing the operation, Mts employee was using our chemical suit when he was hooking up hoses I pull him to the side and let him know that was the right thing to do where all that at PPE he did a great
job. He had a little talk about it I know congratulation and keep it up the hard work job got done safe.

Pic position everybody correct spot check for the way from the well. Everybody out of the line of fire. Great job.

Do you want to operation Mts employee was using the face shield down when he was hammering I approach him let her know that was the right way to do things. He was happy when I let him know that he was
doing the right thing job got done safe

Join the operation Mts employees was using the right tools and gear, especially hammering, putting the face shield down and wearing the PPE when hooking the hoses and taking the hose and out so the
job goddamn safe great observation

PIC successfully placed all safety cones, and red tape around location, to keep people from going in with out of safety gear

A lot of even grounds so we talked about the safety meeting

It was over 94 remind the guys to drink water

Even if not to hot please drink plenty of water

Went working around the grass looks around you the snake come out be safe

Went you walking make sure look you steps because the ground is not level be safe

All procedures and standard was done correctly. Nice job everybody.

As we getting ready to start rigging up, we make sure, that we have all safety gear before we start grabbing equipment that we have impact globes on

All standard was met an was good job

After a long day, working in Long Beach 19 hours total, we had to drive back to Bakersfield when we have another crew going back the next day we as a PIC we could spend the night and start fresh the
next day instead of driving back and sleep only 3 to 4 hours and then go back to work

While rigging up, I have to coach a coworker how to set the red tape around the No go zone because he was a going all the way around the vacuum truck driver and we had to leave him outside the red
tape

We was ready to leave location,, I see my coworker doing his 360 walk around before start driving,,

On the safety meeting we talked about the heat and breaks

On safety meeting we talked about the heat and snakes

PIC successfully lock all fluids lines and electrical power prior to do the job he mentioned on the meeting 5 lock out tag out good job

Transport had on all ppe hooking up hose’s good job

Ad we start pumping nh4cl we noticed a leak on the one of the hummer unions closed to the well leat pic know we stop release pressure fixed the problem and continue

Ad we start pumping nh4cl we noticed a leak on the one of the hummer unions closed to the well leat pic know we stop release pressure fixed the problem and continue

Lotta weeds and tripping hazards uneven surfaces and weather

Today was gonna be over 80 and I put up my umbrella

Today was gonna be over 80 and I let the guys know about the heat matrix

As we arrived on location PIC have a talk with about the plan wath we were going to do how to get to the first well and driving condition

Watch pic test well before calling us to stage

Everybody did a good job yeah she had passed on way back he wins radio contact and visual and everybody get great job

Safety meeting,, before we start the safety, meeting, one of our crew, workers, the newest guy take the step upfront and start doing the safety meeting, explain everything step-by-step even when we
ask him question he was answering question the right way.good job Erik A.

Doing the operation all Mts employees was using the right equipment and the right PP for each task good day overall job goddamn safe

Doing the operation a Mts employee was not using the chemical gloves when he was hooking up suction hose so let him know that he have to use the correct gloves when he’s hooking up hoses specially,
because of chemical. He was fine with that with a decision he want to put the right gloves in the job. Got done , safe.

Observed EE cleaning crude oil around work area. He used a shovel to clean up spill around wellhead and gate valves where are connections are placed.

As I got spot on location and exit the cabin truck I make sure that I used three point contact and facing the truck at the same time

Before start rigging up on the well, we did have a meeting and it was cold, so we start warming up uor body

Used the right ppe for job task is always safe good job MTS operators

As we arrived on location the PIC point to as the muddy areas and possible wear we can be sliding, so he said to be careful when we walk through there

Muddy and a lot of water on celler

Doing the proration, we were pumping lease water and I see a leak from the wall head so right away. I let my PIC you know. We stop the job and fix the problem and we continue pumping in the job got
done safe.

Started raining and got really muddy on location

On location there was a lot of mud and it was raining so we told the guys to be careful out there and don’t fall

PIC in training did great job at best on when backing up radio contact good job

Working at Aera energy belridge I see the ground is not level equipment operator walking short step to avoid feeling good job be safe

All normal procedures and standards but we had to dodge mud slippery

Everybody wearing proper PPE and save all the way around good job fellas

Tight location we had to use extra hoses

Muddy on location and we talked about it

Verified 0 pressure while breaking hoses apart.

Doing the operation Mts, or employee when he was hammering, he has the face shield down all the procedures around the job task was on point great job

On this day with did three producer acid dumps and Juan Hernandez was training on the pump and he did all three with no problems and I also observe it Erik Abundis wearing all his appropriate PPE.

i’ll observe at Jose Abundis on his training day after the three wells, he did excellent on everything paperwork delegating people to do the job and at the end doing the paperwork billing. No issues

Rigging up to the production well I told my coworker not to forget to put the ground cable line before we start the job

When we are right to the location, all MTS employees. We were having our safety meeting and one of those things we talk about it it was the ground was even so we all agree to work around and be
careful watch her steps and the job got done safe.

Working at Aera mwss location is not level look you step make sure not get hurt be safe

Everything was done correct all the cam locks had clamps on them shackles very good job procedures done well

While pumping on CTU plug valve was leaking I let mts crew no and we switched to water to flush lines out we added grease and continued to pump water no leaks were found and we continued the job
safely

While rigging up I notice that high pressure hose were frayed but not leaking I let mts employee no that he needed to switch his hose out before any potential leaks

while spotting back pump in congested location , we used 4 spotters one on every side due to wells, flowlines and other equipment on location

Doing the operation. All Mts employees. He was using the correct gear on from goggles, face, shield, chemical suit, chemical gloves, and booties. So overall was so good the job. Got done safe.

The location was really tight so we need more hoses to reach pump

Everybody did the correct procedures all safety equipment nice job good crew

MTS crew used the right gloves for task good job keep safe

Muddy an slippery had to watch footing placement

Notice the new transport wearing all his proper PPE good job

This was January 31 the last day of this month. We went driving to four hours all the way to Bridge Energy to do an Acid dump and come back safely and . Finished safely the first month.

Proper lifting techniques were used upon racking up the pressure hose.

Observed a driver backing up without a spotter.

On the group safety meeting pic talk about the importance of watching your step went you are walking to avoid slips trips and falls do to hoses and cables on the ground

Asking questions:: A SSE wants to know why we had to turn it down on the popoff, and I have to Splaine him that we had it too high and we had to be close to the max pressure.

All tags and locks were applied to lock box, up to date and with all correct information.

Working with key Inergee on coil tubing everybody doing Safe job and proper procedures all in all good crew nice job

Working at thums island we used radio and spotted to backing up the truck is I good safe matter

As I rigging up I make sure not to make a mess, and then at the end of the job I do the same thing , I picked all my trash

Stepped in mud sloped an then almost tripped over hose’s re rounted hose’s an fFinished job

Today we trying to location but location is to muddy and we shotdow the safe is number one

Co worker forgot to put the static line first, one day after the monthly meeting. That we talked about it

Doing well, we’re getting ready to prime the lines a employee didn’t have the chemical gloves we corrective action he put the right gloves in the job. Got done safe.

Observed EE following all safety precautions while rigging up to wellhead, he alerted before hammering faceshield was down, three point contact going up and down stairs and wore all his ppe while
connecting suction hoses

A lot of mud in the field talk to the guys about it

See Add on all of his PPEN did a excellent job all procedures correct

Doing the operation mts employee not had his first shell all the way down, so I’ll let him know every time he hammering he hast to have the face shield all the way down. He understood the job got
done safe.

operation all the employees were working and wearing a chemical suit hammering with the fill shit facial down everybody’s doing the right procedures. Good job.

When working in La it was hard to see with saftey glass

When driving to LA it was raining hard talked about in safety meeting

As we rigging up to the c/t. We scan the ground for a wet spot were you can slip and slide stray to avoid and not walk backwards that way finish the job safe and sane

Muddy and slippery had to watch foot placement and be careful dragging hoses

We was doing the producer dumps in Belridge and one of the transport driver SSE he forgot to get the monitor out of his uniform and put it on top of the chemical suit on. I had to tell him to put it
out.

When driving to the island it was really foggy so Sanchez called me to drive safe to location

As we rigging up we all wear the right ppe for the job impact globes, hard hat, safety glasses, steel towth boots, and fire protection clothing

As we rigging up we all wear the right ppe for the job impact globes, hard hat, safety glasses, steel towth boots, and fire protection clothing

Do you know operation we were pumping and priming the lines we’re getting ready to start we ACiD I see a guy approach where the red tape is so right away I’ll let him know you can be around this
area because we got pressure hoses and we are getting ready to pump Acid he understood and we continue pumping in the job. Goddamn, safe.

Before start rigging up on the well, they have the air fan pointing the oposit way , I have let them know to flip the other way..

Wasn’t looking down and 3rd party tripped up on grading

While ee was exiting gate he noticed it had begun to close so he stopped veh. The gate ended up against his tire we held it open so he can drive it out. No damage to gate or vehicle

As we drove on location I checked for an even grown or water on the ground because of the rain that we have 2 days ago making sure that we weren't going to be sliding the ground was ok we got in and
out wedout incidents

Everyone was in perfect place for job an proper tools

We are ride to the location and our PIC notice that it was a tie location so we talked each other and we figured out how we’re going to pump the job because it was only one one truck can fit on the
location so we had to run like different hoses directions to the location we did that and the job got done safe

Location very muddy and slippery at your watch footloose man and being careful everybody did a good job

While spotting in equipment EE noticed my h2s monitor was covered up under my jacket and brought it to my attention. So I told him thanks didn't realize it was covered and relocated it.

We went to do a job today but last night rain so we not available to spot the equipment on location so Aera decided to cancel the job for a safety reason good call safety is number one

This was a producer dump on one of the island, and right after we was finishing pumping the acid the shackle came off from the high-pressure hose so we had to stop pumping put the shackle back on and
finished the job. With no more issues..

Driving on to location I scan location making sure that is clean, at the end of the job we make sure that we leave location the same way or better

Watching how everybody got State physician of people was nice Eleanor good job safe environment

Producers First well, location tight and lots power lines , but we was able to spotted it a leas 15 feet away from the power lines..Aera safety guy showed up and he looked at the power lines and he
it was perfect..

Be safe went used the hammer stays away 6 ft and put you faceshell down

While backing truck at Chaffee. Spotter was wearing vest and stopping me to reposition himself while he back me around island to opening

We got on location , wild we were rigging up I observed my coworkers, making sure that they were ppe that is required for the job, as well the right tools for the job

We got on location , wild we were rigging up I observed my coworkers, making sure that they were ppe that is required for the job, as well the right tools for the job

A lot of pipes on the ground talked about it in safety meeting

Location is small so ee used two spotteds to avoid incident good job MTS crew

A lot of tripping hazard had them coned off an marked

Doing the operation we got everything hooked up getting ready to to pump. We were priming the lines and then I see a little leak coming from from the well so I’ll let my PIC know we got all together
we made a plan and we got the leak fix and we continue pump in a job the job. Got done safe.

As we approach to location pic. Was wearing the right clothing to back mi up on location to rig up we use the right tools for the job, hammer , pipe wrench , the right tools for the job

We need more ppe for cool weather this morning is like 25 temperatures for the head try to be safe MTS crew

It was raining a lot and talked about it in safety meeting

Noticed everybody doing your job correctly and the right positions for the job

Beginning the operation we primed the lines and we were getting ready to pump the job and I look underneath the pump unit and I see a puddle of oil. I’ll let my PIC know we stop the job we check and
it was the oil from the pump so we make an adjustment, we call our dispatcher to swap pumps. We got the pump and we continue pumping in the Job got done safe.

We pumping today a new chemical they used all the ppe treatment like acid good job MTS operators be safe

Had a lot of slip trip hazards and pinchpoints and let us all pointed out in the safety meeting at all and all good job

Multiple spotters for spotting equipment

MTS crew they make a nice housekeeping after the job good job be safe

Rigging up on the well I see my coworker taking the Chaing guards around the cellar off, I told him don’t do that. That chain maybe save your life

While looking for are first well, we had a hard time finding it cause the well name was peeling and wasn't legible.

Everyone went some one used hammers please stay away or face shield down be safe for odjects

When we’re getting ready to Rip up. I see the fan wasn’t on right away at so my PIC, we got it working and we are continue rig up and the job got done safe.

Area was an even rocky ladder tripping hazards everybody kept her eye out and was cautious and had good housekeeping

Still hot weather please keep drinking plenty of water be safe

Doing the operation a MTS employee forgot to wear his booties at that point we were just priming the lines so I let him know that he forgot to put his booties on and his answer was oh sorry I forgot
and he was OK to go. Put it back on and the job. Got done safe.

Hyper Aware of the congestion of other parties and equipment

Used the right gloves for the job you task don’t used the some gloves for all job used the right choice gloves be safe

Chemical gloves were used through out all pumping process

Doing the operation we primed the lines pressure test when we getting ready to pump lease water I see a little leak from the well we got together we fix the problem and we continue pumping in the job
got done safe.

Everybody had their protective equipment on area caution taped off all in all good job team

co-worker driving to location not following intructions and end up on dead end road, or used radios, potential hazardous backing up 1000 ft down hill and curvy road.

Job went smooth

We did 3 producer wells and thanks no issues, everything went fine

Doing the operation after we did the praying the lines and we start pumping less water. I see a little leak coming so I’ll let my pumper to stop and fix the problem and then we continue pumping we
know issues.

Doing the operation after we did the praying the lines and we start pumping less water. I see a little leak coming so I’ll let my pumper to stop and fix the problem and then we continue pumping we
know issues.

I was riding with coworker and I forgot to buckle up for few minutes and told me about

Used cellar hooks for panels instead of bare hands

Doing the operation a Crico vacuum truck show up to the location we were getting ready to prime his hose and I open the bleeder like halfway full and my monitor start beeping right away. I close the
bleeder and after that everything was fine I let my safety guy know like what happened.

Fall correct procedures correct paperwork all in all good job

Doing the operation a Mts employee was hammering we are the face shield all the way down so I let him know to put the face shield all the way down and he continue hammering the right way after that
the job is complete we talk about it he was fine with it good and safe .

We was ready to ring up on the well and my coworkers And I was about ready to open containment and I look and there was no red tape up yet so I stopped him and told him to wait until the supervisor
set up the exclusion zone

3rd party company Had no gloves on while task was being preformed.

Today working at thums islands filled very hot please keep driving plenty of water be safe take care you self end the others

Safely walked around the flow lines rather than walk over them

Ever body has proper ppe

Do you want operation a Mts employee didn’t have his a H2S with him so right away I’ll let the person know that he hast to have it on. He was OK and he went to grab it and put it on I’ll let him
know that he hast to wear it at all times

Working at holmes wertern this weather is not safe for everyone please keep drinking plenty of water even if you don’t fill needs drink be safe

On these day , we was working on warren WD5 and the temperature was above 100° and my transport driver was wearing a chemical suit on for a long time the pump was having problems leaking and then the
wellhead was leaking so I had to send a transport driver with a chemical suit on to get plenty rest inside of his truck . And drink water. And my self

For next day job on the same lease. Dispatch told me to drop off my shower for tomorrow’s job that helps pull in the shower less hazardous

I went to location to change flat tire when I got to location supervisor line me up where to park my pick up,and caution tape the area and safety huddle go to work

“Let me see your hands” before any movement was used by third party.

Real rocky terrain And bushy tripping hazards clean area before work

Doing the operation, we were pumping water everything was going well, and after that we start pumping acid like five minutes later I saw the pump start leaking. I’ll let my supervisor know and we
stop pumping we got together and we start pumping water to flush the line. We fix the problem and then we can continue with the operation and after that, we got the job done safe

It was hot pumper help pic to put the acid hose

After the job we lived the location clean pick up all the trash always practice housekeeping and all locations be safe and drink plenty of water

2 transports taking turns to look for leaks because it’s to hot

Our safety reminded me to put both of the wheel chocks down not only one

Aera safety rep did on audit and coached me on chain placement from truck to trailer. I told him I've didn't know about crossing the chains and he responded that it was corrected and it was a
coaching opportunity

After we finish the job. We unhook everything and we were getting ready to leave and I look at the well and I see a little leak from the casing so I let my supervisor know he made some calls they came
in and fix the problem and everything. Got done safe.

It was 106 out side so told transport to go in side the truck to cool off

As we arrived on location I scan the location so went we finish the job, try to leave location as clean as possible

Myself and coworkers we were impact globes for the job wile working rigging up or rigging down

Myself and coworkers we were impact globes for the job wile working rigging up or rigging down

While working at thums island (White). I started sweating profusely and feeling ill. EE Shadowing me told me to grab water and get in pickup to cool down. Temps were only in the 80's but high humidity
got me over heated

Face shield was properly worn while hammering a small wing.

Turn the operation we are start pumping we were pumping release water and I see a little leak so I let my pump that we had a little leak going on. We fix the problem and we got able to finish the job.
We had a problem nice and safe

After I hooked up suction hose to pump transport, I opened hand flapper valve and felt it filling so I went and checked what fluid was open and it was the hcl/hf so I asked why it was open and he
didn't even realize he drove to field like that. So I told him we should tighten up hammer union and prime up down hole pumping ammonium chloride. He said no and proceeded priming up with acid after
he primed it and sprayed acid around fittings on well head I had to pour bottled water before I winged up hammer union

After I hooked up suction hose to pump transport, I opened hand flapper valve and felt it filling so I went and checked what fluid was open and it was the hcl/hf so I asked why it was open and he
didn't even realize he drove to field like that. So I told him we should tighten up hammer union and prime up down hole pumping ammonium chloride. He said no and proceeded priming up with acid after
he primed it and sprayed acid around fittings on well head I had to pour bottled water before I winged up hammer union

While completing jsa and customers permit, EE Pulled in and spotted pump before I was able to sniff the well

3rd party vehicle was backing with no spotter, stopped him and assisted with spotting.

Doing the operation a MTS employees. They were using the right tools and wearing the chemical suit, it was a great communication with the supervisor and a pump operator and being say the job got done
safety

We was doing a CTU with GPS at Crimson Lost Hills and we did not have a port’ y “” party and we have to drive like a mile away,,, not good,,

A lot of traffic people on phone

Chemical suit was completely on when handling chemical discharge cap, along with face shield being down. Great job.

As we rig up to the well I observed my coworkers that they were using face shield properly hammering high pressure unions or connecting or disconnecting suction hoses

Had to you my heat glove because pipe was hot

Going to be 104 told transport to drink a lot of water

Working on second well, I see my coworker not wearing the impact gloves, AERA wants us to be wearing gloves all the time.

Having a safety meeting, I noticed that two of my co-workers didn’t have a H2S monitor in front of the shirt, I have tell them to put it in front.

Working at Aera energy belridge please keep location the way we found make sure you do housekeeping all the time be safe

Person Safely used 3 points of contact when climbing stairs

Checking on next location, and taking short cuts I was walking on uneven walking surfaces and rocks , then I decide to walk on the road

Wild pressure testing it was a man walking closer and I have to stop the pumper until the walking man was in good distance

Before start working on the trailer make sure I have my Ppe on make sure the trailer chucks blocks be safe

Everyone was wearing there ppe

Wore all appropriate attire while pumping chemicals

Correctly secured tools and equipment prior to traveling

Before job started cones tape and signs were up. I set up eye station but forgot to test. After the safety meeting it was brought to my attention, I tested eye wash and shower before job started.

Went operator used the hammer please stay away try to avoid to get hurt be safe

Seen every body in there proper PPE for job tasks

Working at freeman island we have hoses everywhere please look you step be safe

Seeing everybody with proper PPEN paperwork and all cones out and shocks jobsite luck safe

Used the right ppe always is a good safety matter keep used be safe

Seen a ploy E wear an H2 S monitor within breathing area

Ball gun didn’t work had to do it manually told pic

Used the chemical ppe is dangerous trying to not work hard and take care you self drinking plenty of water stay cool

As we rigging up to the well before hammering the unions we make sure to put face shield down to avoid getting foreign objects on the eyes

Doing a rig wash and let the guys know to drink a lot of water because they really don’t use chemical suit